Clik here to view.
20040921_lma 14_switchon
20040921-lma-14-switchon: 2-pin header switch mounted with one pin connected to pin 4 and the other to pin 8 via short piece of wire, covered in heat shrink. 20040921-lma-14-switchon: 2-pin header...
View ArticleClik here to view.
20040921_lma 13_switch
20040921-lma-13-switch: Resistor soldered between pins 1 and 4. 2-pin header and short piece of wire for programming switch. 20040921-lma-13-switch: Resistor soldered between pins 1 and 4. 2-pin...
View ArticleClik here to view.
20040921_lma 12_resistorR1
20040921-lma-12-resistorR1: Another 4.7k Ohm 1/4 watt resistor for attachment between pins 1 and 4. Note bent leads for flush-mounting to socket. 20040921-lma-12-resistorR1: Another 4.7k Ohm 1/4 watt...
View ArticleClik here to view.
20040921_lma 10_powerwires
20040921-lma-10-powerwires: Servo lead positive and negative wires connected to pins 1 and 8, respectively. 20040921-lma-10-powerwires: Servo lead positive and negative wires connected to pins 1 and...
View ArticleClik here to view.
20040921_lma 09_signalwireon
20040921-lma-09-signalwireon: Signal lead solder to resistor, covered in heat shrink. 20040921-lma-09-signalwireon: Signal lead solder to resistor, covered in heat shrink.
View ArticleClik here to view.
20040921_lma 08_resistoron
20040921-lma-08-resistoron: Resistor attached to pin 6, mounted nice and flush to side of socket. Note tinned signal lead from servo lead. 20040921-lma-08-resistoron: Resistor attached to pin 6,...
View ArticleClik here to view.
20040921_lma 07_resistor
20040921-lma-07-resistor: 4.7k Ohm 1/4 watt resistor for pin 6 and the signal wire. Pictures is a 1/2 watt resistor, which is all I had laying around at the time. Note how I bent the lead so that it...
View ArticleClik here to view.
20040921_lma 06_capacitorson
20040921-lma-06-capacitorson: Capacitors on the socket. 20040921-lma-06-capacitorson: Capacitors on the socket.
View ArticleClik here to view.
20040921_lma 05_capacitors
20040921-lma-05-capacitors: The two capacitors C1 and C2. They are to be soldered between pins 1 and 8. The yellow one is a tantalum dipped 10uF 16V cap. Note that it is polarized. The positive end...
View ArticleClik here to view.
20040921_lma 04_pin3to5
20040921-lma-04-pin3to5: First we wire a connection between pins 3 and 5. Resistor lead works well, but I used a small piece of wire. 20040921-lma-04-pin3to5: First we wire a connection between pins 3...
View ArticleClik here to view.
20040921_lma 03_baresocket
20040921-lma-03-baresocket: The bare socket. Note and remember the pin orientation here. 20040921-lma-03-baresocket: The bare socket. Note and remember the pin orientation here.
View ArticleClik here to view.
20040921_lma 02_prototype1
20040921-lma-02-prototype1: Another view at the first attempt. 20040921-lma-02-prototype1: Another view at the first attempt.
View ArticleClik here to view.
20040921_lma 01_prototype1
20040921-lma-01-prototype1: My first attempt at the original design. Pretty ugly, but it works! 20040921-lma-01-prototype1: My first attempt at the original design. Pretty ugly, but it works!
View ArticleClik here to view.
20051106-spiritelite 04-alldone
A big box. Filled in the space inside the box with the Sunday newspaper. A big box. Filled in the space inside the box with the Sunday newspaper.
View ArticleClik here to view.
20051106-spiritelite 03-finalwrap
Wings and fuselage taped to a cardboard "sled". All wrapped with bubble wrap. Wings and fuselage taped to a cardboard "sled". All wrapped with bubble wrap.
View ArticleClik here to view.
20051106-spiritelite 02-wingrod
Wing rod taped to side of fuselage! Wing rod taped to side of fuselage!
View ArticleClik here to view.
20051106-spiritelite 01-wingsfusewrapped
Wings and fuselage wrapped with bubble wrap. Wings and fuselage wrapped with bubble wrap.
View ArticleClik here to view.
20030504_phantom_04_fullrightoriginal
20030504-phantom-04-fullrightoriginal 20030504-phantom-04-fullrightoriginal
View ArticleClik here to view.
Clik here to view.
